Cleaning method of the fuselage and fan blade of the range hood
Cleaning method of the range hood
After cooking each time, let the range hood work for 30 seconds to 1 minute, and the fume water remaining in the air and the unburned carbon monoxide that has not been completely burned out of the house. At the same time, while there is still residual heat on the range hood, simply wipe the surface with a rag to easily wipe off the oil stains on the range hood, and keep them clean and not greasy.
Cleaning method of range hood fan blades
1, dishwashing detergent and vinegar soaking method. Remove the fan blades and soak them in a basin of hot water mixed with 2 ml of dish soaking liquid and 50 ml of vinegar. After soaking for about 15 minutes, wipe them with a clean rag. The body of the range hood is also cleaned with this solution. Pay attention to keeping the solution temperature at around 60℃, so that the detergent effect is the best.
2. Pressure cooker steam flushing method. Put half a pot of cold water in the pressure cooker and boil it. When the steam is continuously discharged, remove the pressure limit valve. Turn on the range hood to aim the steam column at the rotating fan blade. Because the high-hot water steam continues to rinse the fan blade, oil sewage will flow into the waste oil box through the oil drain tank.
3. After drying the fan blades of the brushed range hood, apply a layer of glue to share. After a few months, tear off the oil stains on the fan blades. The oil stains are all on the glue layer, which is both convenient and clean.
4. First lay newspapers on the stove, turn on the switch of the range hood, "Preheat ”" fan blade for two minutes, spray dishwashing liquid on the fan of the range hood, turn off the range hood, let it sit for three minutes, then spray 60℃ hot water into the fan of the range hood, and then turn on the switch to let the dissolved oil drip into the oil storage box.