What should we pay attention to during use when using water transfer painting?
Matching techniques for water movement painting
1. Very suitable for lazy people. Fast-paced life is fast and simple. You just need to paste a beautiful printed pattern where you need to be decorated. Compared to asking a decoration team to design and make decorative walls with higher cost or buying hand-painted furniture outside, it is really convenient and practical.
2. Water transfer painting can be pasted on the surface of smooth texture such as walls, glass, ceramic tiles, refrigerators, air conditioners, cabinets, furniture, etc. (Considering the differences in walls, it is recommended that walls of special materials or walls with a long time can be selected first, and use the free trial stickers from our store to do the test. If there is no problem, you can feel free to stick them). Be sure to pay attention: wall powder is prone to drop and inferior walls and paste them after being pasted, the buyer will be responsible for all consequences.
3. Water transfer painting is a one-time job. It is recommended to roughly arrange the location to be pasted before pasting, and then paste it at one time. If it is posted on the wall, it is recommended to change the wallpaper or wall paint color at home. If you paste other materials such as ceramic tiles, glass, furniture, etc., you can wipe them off with alcohol or stick them with tape and then pull them off (the tiles, the glass can also be scraped off with a blade)
4. The service life of water-moving painting has a certain relationship with the use environment. Generally speaking, there is no problem in using indoors for more than 5-6 years, and it will fade naturally over time.
5. Water transfer painting is waterproof and can be applied in the shower room, kitchen and bathroom. However, before applying, you must first wipe off the oil stains on the veneer with a dry rag before applying it. This will keep it firmly. If it is dirty, you can use a damp cloth or dishwashing liquid, which is very convenient.
What should you pay attention to during the use of water transfer painting?
(1) Do not forget to remove the protective film on the surface before soaking in water. The immersion time should not be too long. Take it out immediately after soaking thoroughly. Some customers forget this before soaking in water, and as a result, the water painting will be stuck on the protective film as soon as possible; and if the soaking time is too long, the water painting will float in the water. It usually takes only 2-3 seconds and it can be used after soaking.
(2) Scrape. This is the most important process. If you don't scrape well or just scratch it a few casually, many bubbles of large and small will appear, which is ugly. Therefore, when scraping, you must be patient and scratch it a few times. Every part of the pattern should be scraped out and the air should be scraped out. The tool is recommended to use a thinner recharge card or a small right-angle triangle ruler. This kind of thing is elastic and has the best effect.
(3) When removing the bottom paper, do not lift it out. This will remove the water. You must stick to the wall and slowly "paste" downwards or left and right.
(4) Maintenance. Be careful not to scratch before drying. It does not require special maintenance. If it is dirty, you can use a soft towel to soak hot and cold water and dishwashing liquid to wipe it. However, please do not use a cleaning cloth or something with hard fiber, as it will scratch the water and move it.
Water painting maintenance
Do not scratch before drying. It does not require special maintenance. If it is dirty, you can use a soft towel to soak hot and cold water and dishwashing liquid to wipe it. However, please do not use a cleaning cloth or something with hard fiber, as it will scratch the water and move it. Also, avoid scratches on the sharp device.
Cleaning of water transfer painting
Water transfer painting is waterproof and can be pasted in the shower room, kitchen and bathroom. However, before applying it, you must first wipe off the oil stains on the veneer with a dry rag before applying it. This will keep it firmly. If it is dirty, you can use a damp cloth or dishwashing liquid to scrub it, which is very convenient.